Ok so I got my dual coil tank yesterday and i have to say I am very impressed. The flavour is not quite as strong as i am used to out of these but absolutely no burnt taste and no lack of vapour. Also a very lovely Strong hissing, crackling off the coils which is a great healthy sound for a cartomizer, means its heating up well.
Construction is excellent, strong yet simple, elegant yet intricate. I for one LOVE it.
How simple is a plastic tube with two end caps and a carto running up the middle. Now the finish on this could have been awful yet it isn't. If I had any criticism, it would be that the plastic tank has a little dot where it has been taken out the mould. But for the price its a very very minor criticism. The metal ends are lovely, the plinth lovely and the mouthpiece a wonderful piece of machined metal. Maybe not to all girls taste but I know for guys machined metal is just sooooo nice.
So construction is awesome and I really am happy with this.
Like I mentioned before this is made up of several sections which all come to bits for cleaning which I LOVE again.
The mouth piece comes out
The white silicone bung thats in the carto under the mouth piece(to stop fluid running into your mouth from the carto) comes out
push down on the carto where the mouth piece was and now you can slide the carto out
Once thats out you have an empty tank
you can now pull off the two metal ends
Same again to fill these its amazingly simple so im not sure why anyone is having issue
Take the metal cartomizer with filler in it.
Get your fav liquid and fill the carto slowly and steadily it will eventually start to either come out the the end of the carto or the hole in the side.
Now once its coming out the ears of the cartomizer you know its filled.
take your tank with the metal caps all pushed tightly together. and shove the carto right through the middle of the tank untill it wont go any further.
get your liquid again and start to pour it in between the tank and carto now and the tank will fill up nicely
Once its about 2mm from the top of the tank
Take your white silicone bung and pop that into the carto so it is covering the polly wool preferably with the flatter side of the bung facing up.
Then take your fav mouthpiece or once supplied and push it in the carto making sure the black seal is not visible on the mouthpiece.
Now there is lots of liquid on the coils it will vape lovely
If you want to swap out liquids and cartos while the tank is filled have a spare dropper and bottle then just pop off the mouth piece leave in the white bung, push the carto down then pull it almost all the way out so the top is just above the black seal on the bottom of the tank. then just pour out your liquid into your spare bottle or use the dropper to take it out.
This way you dont have to waste any.
Even if the tank moves up or down on the carto it should not be leaking as the liquid will not go passed the seals on these tanks they are very good.
I have notice you really only want to screw these on while holding the plastic tank this stops you over tightening it and then struggling to get it off. These really dont need to be screwed on TIGHT!! lol
Also people say this is a very light draw compared to the tank systems, this is down to the fact it uses a drip top so a much bigger hole to draw through and if you dont use the white silicone bung in the carto the draw will also be lighter due to no restriction on air coming through the carto.
If you dont like the metal drip tip maybe try a mouth piece that you like as the DC tank is very good and very customizable to work how you want it to yet like i said very simple in construction and design, IT JUST WORKS.
Worst thing about these is which colour to buy lol
