best atty,s to use with sd mk11

[real-player]

 hi all
         

            can anyone suggest what the best attys to use with my sd For lots and lots of vapour. I have been using my t t conversion this is ok except i keep getting a metallic taste ive had this one about two weeks if that  also the 901 s that came with my first ever kit.  I have also tried the dct  which i say no more on! . i ordered some clearos one of each but then could not fill them yes yes u ALL might laugh i was fuming so had to then order a filling kit even more   NEWBIE  so if anyone can say which they prefer for good vapour then let me know

                                                                                                    thanks
           

[danwldr]

I use a screwdriver with clearomisers and usually get great vapour but it all depends on your e juice content.
I mix my own with vg.

[Kenneth131]

I know il get shot down for this but for me the best vapour came form these using standard pre mix liquids

http://www.totallywicked-eliquid.co.uk/products/cartomiser-systems/dual-coil-cartos/tornado-mega-dual-coil-cartomiser-15ohm-product.html

That and then my ego c LR attys. but depends what flavour your using I found the citrus flavours not too great form the cartomizer,

I think allot of people liked the smokeymizers but iv never used them. I liked the low resistance on the SD but see what everyone else chips in with.

[real-player]

 is this for a 501  conection thanks i havent seen these  ill see if anyone else has anything to add    then maybee ill have to get my card out again shiney syndrome comes to mind lol thanks again

[real-player]

hi all
         

            can anyone suggest what the best attys to use with my sd For lots and lots of vapour. I have been using my t t conversion this is ok except i keep getting a metallic taste ive had this one about two weeks if that  also the 901 s that came with my first ever kit.  I have also tried the dct  which i say no more on! . i ordered some clearos one of each but then could not fill them yes yes u ALL might laugh i was fuming so had to then order a filling kit even more   NEWBIE  so if anyone can say which they prefer for good vapour then let me know

                                                                                                    thanks
           

just read a old post someone saying to drop extra drops into the tt before replacing the tank  anyone with this
                                                                                                       thanks

[cyborg]

I think this is a personal thing as is the case with a lot of e-cig things.
I must have at some point screwed one of everything to my SD & everything works great admittedly an adaptor is a must, I recently acquired a 901 to eGo adaptor that has the threads for the cone and am using it with a C atty at the moment, (unfortunately TW don’t sell this) so this is the next best thing,
http://www.totallywicked-eliquid.co.uk/products/drip-tips-adaptors/sd-mkii-901-510-tank-conversion-kit-product.html
or
http://www.totallywicked-eliquid.co.uk/products/drip-tips-adaptors/901-510-adapter901808d-1-bat-to-510-at-product.html
This one is to short for Tanks but good for everything else 510

My favourite atty for the SD is direct dripping a 901 followed by a C when driving.

[Kenneth131]

I personally never got on with the 901s but i think they were ideal for DD i just never did it and the carts were not good.

I totally agree with cyborg, like flavours attys are a very personal thing you could like one and i would hate it. like lots hate the mega cartomizer.

So its definitely a case of trial and error but as cyborg says an adaptor is a must as its needed to change from the 901 threading to a 510 and you might need a longer one depending on what your screwing onto the sd. 

[cyborg]

                                                         
                                                                          Come on TW this is what the SD owners want

[jurgen]

I keep that in mind............
+1 cyborg

[real-player]

+ 2 for that thanks cyborg

[jeddy 3]

I can't say for sure which is the best atty for the SD, I can only tell you that I bought the conversion kit with mine and therefore used the Tornado-T cone shaped attys and have not had the desire to try anything else. (knowing me, they're the absolute worst atty you can put on an SD but nobody told me  )

[RichJr]

The T is a great atomizer! You made a great decision. The only thing better IMHO is the C (with a booster of course).