I'm so excited about the mod that I'm going to be making when all my supplies show up.
I would like to throw out to Cisco for helping me with all my parts for this mod.
The plan for this mod is an all in one job. You can run it at 3.7V, and you can run it at 6v. You could also use two 801 atomizers at one time if you wanted too, or just one if you didn't want the major vapor cloud.
It will feature one 901 thread, two 801 threads, and one 510 thread. So in other words it's 3-E-Cigs in one with out the need for adapters. Then thanks to the outer ring that is taller than most flashlights it will protect the threads from being damaged when they are not in use, or if the device gets dropped.http://www.qualitychinagoods.com/romisen-rcm4-1x186502xlir123a-cree-flashlightfcrcm4-p-811.html
Romisen RC-G4 1x18650/2xLIR123A CREE flashlight(FC-RC-G4)
DSD 2-bay Intelligent for 16340/18650/17670 Charger (DSD)
For the 6v setup
2 pcs of Li - ion 17335-1000mAh 3.0V Battery (17335-1000)
For the 3.7 setuphttp://www.qualitychinagoods.com/ultrafire-2400mah-37vprotected-batteryuf186502400p-p-665.html
2 pcs of UltraFire 2400mAh 3.7V-Protected Battery(UF18650-2400P)
$14.59 for two of themhttp://www.qualitychinagoods.com/liion-battery-lir123a-chargerfczkcr2-p-505.html
This Charger only Charges 3.7v batteries, and according to Cisco(thanks again) it would be a bad idea to charge 3.0v batteries in it.
Li-ion Battery CR2 & LIR123A 3.0V Charger(FC-ZK-CR2)
Here is the plan in a simple mock up drawing. All atomizers will be hot when turned on. You click the on, and off switch on the back of the device, and the led from the front will light up. This will be behind painted glass, or Plexiglas which has not been decided on. It will not blind the user(or me lol) because the glass will be painted. Then there will be a normal switch that you click to vape with. I'm thinking of a rocker switch. I have come to really like that kind of a switch from my simple mods.
All is on the way from China, and I hope to get started on it soon!
Thanks again Cisco