It has probably been posted before, but this is a journey of discovery for me, so I thought I would share.
I have had a vape that was not working right, I was getting too much gurgling in the inward inhale from the bottom of the atomiser and that was no good. i took the cart out and removed the battery and blew through the small hole. got a few drops out. The damned thing was near flooded.
Fond that I could reduce the content of the cart through taking the wadding out and then squeezing it between a wad of tissue paper just to get some surplus juice out.
Then, and this is the important thing, I put the wadding in the cart wadding holder back to front so the more soggy bit was closer to the atomiser filament.
So i solved two problems simultaneously
1) overfilled carts through squeezing out the surplus
2) getting the most out of a near drained wadding through putting it back in the cart back to front.
So if your vape is low on vapor, reverse the wadding
